Panasonic PT-RQ13K
雷射高階工程投影機
-雙雷射光引擎
-解析度可達5120x3200
-對比度20,000:1
-支援360度安裝
-可另選購各焦段鏡頭
Power supply | 100–240 V AC, 50/60 Hz |
Power consumption*1 |
1,270 W (0.3 W with Standby Mode set to Eco*1, 4 W with Standby Mode set to Normal); Average power consumption: 913 W (Normal Mode), 782 W (Eco Mode), 531–732 W (Long Life 1 Mode), 477–702 W (Long Life 2 Mode),423–665 W (Long Life 3 Mode) [Operating temperature: 25 °C (77 °F), altitude: 700 m (2,297 ft), ICE627087: 2008 Broadcast content, Picture Mode: Dynamic, Dynamic Contrast Mode: 3] |
DLP™ chip | |
Panel size |
22.9 mm (0.9˝) diagonal (16:10 aspect ratio) |
Display method | DLP™ chip x 3, DLP™ projection system |
Pixels | 4,096,000 (2560 x 1600) x 3, total of 12,288,000 pixels when Quad Pixel Drive set to OFF, 49152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON |
Refresh rate | 240 Hz*2 |
Lens | Optional (no lens included with this model) |
Light source |
Laser diode (Class 1) (Class 3R for US models), Light-source life*3: 20,000 hours (Normal Mode), 24,000 hours (Eco Mode) |
Screen size (diagonal) |
1.78–25.4 m (70–1,000˝), 1.78–15.24 m (70–600˝) with ET-D75LE8, 3.05–15.24 m (120–600˝) with ET-D75LE90, 16:10 aspect ratio |
Brightness*4 | 10,000 lm |
Contrast*4 | 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) |
Resolution | 5120 x 3200 pixels (Quad Pixel Drive: ON) |
Supported RGB signal | XGA–WUXGA |
Supported video signal | NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i, 4K |
Optical axis shift*5 (from center of screen) |
|
Vertical | ±59 % (±44 % with the ET-D75LE6, +74 – +84 % with the ET-D75LE90) (powered) |
Horizontal | ±29 % (±19 % with the ET-D75LE6, -12 – +16 % with the ET-D75LE90) (powered) |
Keystone correction range*6 | Vertical: ±40° (±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±15° (0° with ET-D75LE90) |
Keystone correction range with optional Upgrade Kit ET-UK20*6 | Vertical: ±45° (±40° with ET-D75LE10/D75LE20, ±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±40° (±15° with ET-D75LE6/D75LE10/D75LE50, ±20° with ET-D75LE20, ±25° with ET-D75LE30, ±30° with ET-D75LE40, ±40° with ET-D75LE8, 0° with ET-D75LE90), Up to a total of ±30° during simultaneous horizontal and vertical correction. |
Installation | Ceiling/floor, front /rear, free 360-degree installation |
Cabinet materials | Molded plastic |
Dimensions (W x H x D) | 578 x 270 x 725 mm (22 3/4˝ x 10 5/8˝ x 28 17/32˝) (optional lens, legs and lens cover not included); 578 x 323.5 x 740 mm (22 3/4˝ x 12 23/32˝ x 29 1/8˝) (Including legs at shortest position and protruding parts) |
Weight*7 | Approx. 49.0 kg (108 lbs) (optional lens not included) |
Operation noise*4 | 46 dB |
Operating environment |
Operating temperature: 0–45 °C (32–113 °F)*8, operating humidity: 10–80 % (no condensation) |
Applicable software |
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10 Auto Screen Adjustment Kit) |
TerminalsPT-RQ13K |
![]() |
*1 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal. *2 Refresh rate varies depending on scanning frequency. *3 At this time the brightness will have decreased to approximately half of its original level. Light source lifetime may be reduced depending on environmental conditions. *4 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *5 Optical axis shift function cannot be operated when used with the ET-D75LE50. *6 Range varies depending on mounted lens. *7 Average value. May differ depending on the actual unit. *8 When the operating mode is set to Normal, the operating temperature range is 0 °C (32 °F) to 45 °C (113 °F), and the operating temperature range is 0 °C (32 °F) to 40 °C (104 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,780 ft) above sea level. When the operating mode is set to Eco or Long Life 1/2/3, the operating temperature range is 0 °C (32 °F) to 40 °C (104 °F). When used with Smoke Cut Filter, the operating temperature range is 0 °C (32 °F) to 35 °C (95 °F). Furthermore, the projector cannot be used in locations over 2,700 m (8,858 ft) with the operating mode set to Eco or Long Life 1/2/3. When used with Smoke Cut Filter, the projector cannot be used in locations over 1,400 m (4,593 ft). The brightness of the light source may drop depending on operating environment and the operating temperature range in order to protect the projector. |
看更多產品
聯絡我們Contact Us
如任何產品相關需求,歡迎您與我們聯絡(服務時間:平日9:00~18:00):
注意事項
請務必填寫有星號(*) 標示之欄位,送出後我們將三分鐘內與您聯繫
※ 客服服務時間 : 週一至週五 9:00~18:00
晟弘科技有限公司-LINE官方帳號
行動條碼

※如何加入好友?
方法(一) 開啟LINE主選單>加入好友>行動條碼 掃描左圖即可加入好友
方法(二) 點擊左方 Add Friends按鈕 即可加入好友
方法(三) 搜尋LINE ID:「@tya3953z」
有任何投影機、投影布幕或其他產品相關需求都歡迎透過LINE詢問。
我們會不定期分享產品相關訊息或優惠活動資訊,歡迎您將晟弘科技加為好友,隨時掌握我們的最新動態! : )