Panasonic PT-RQ22K
雷射高階工程投影機
-雙雷射光引擎
-解析度可達5120x3200
-對比度20,000:1
-支援360度安裝
-可另選購各焦段鏡頭
| Projector type | 3-Chip DLP™ projector |
| DLP™ chip | |
| Panel size | 22.9 mm (0.9 in) diagonal (16:10 aspect ratio) |
| Display method | DLP™ chip x 3 |
| Pixels |
4,096,000 (2560 × 1600) × 3, total of 12,288,000 pixels, 49,152,000 (12,288,000 x 4) pixels when Quad Pixel Drive set to ON |
| Refresh rate | 240 Hz*1 |
| Light source | Laser Diode |
| Light output | 20,000 lm*2 / 21,000 lm (Center)*3 |
| Time until light output declines to 50 %*4 | 20,000 hours (NORMAL) /24,000 hours (ECO) |
| Resolution | 4K+ (5120 x 3200 pixels) (Quad Pixel Drive: ON) |
| Contrast*2 | 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) |
| Screen size (diagonal) |
1.78–25.4 m (70–1,000 in) with 16:10 aspect ratio 1.78–15.24 m (70–600 in) with the ET-D75LE8 / ET-D3LET80, 16:10 aspect ratio 3.05–15.24 m (120–600 in) with the ET-D75LE95, 16:10 aspect ratio |
| Center-to-corner uniformity*2 | 90 % |
| Lens | Optional (no lens included with this model) |
| Lens shift*5 | |
|
Vertical (from center of screen) |
±59 % (±56 % with ET-D75LE6 / ET-D3LEW60, +69 % – +84 % with ET-D75LE95) (powered) |
|
Horizontal (from center of screen) |
±29 % (±19 % with ET-D75LE6 / ET-D3LEW60, ±21 % with ET-D75LE95) (powered) |
| Keystone correction range |
Vertical: ±40° (± 22° with ET-D3LEW50, ±28° with ET-D75LE6 / ET-D3LEW60, +5° with ET-D75LE95), Horizontal: ±15° (0° with ET-D75LE95) |
|
Keystone correction range with optional ET-UK20 Upgrade Kit |
Vertical: ±45° (± 40° with ET-D75LE10 / ET-D3LEW10, ET-D75LE20 / ET-D3LES20, ±22° with ET-D3LEW50, ±28° with ET-D75LE6 / ET-D3LEW60, +5° with ET-D75LE95) Horizontal: ±40° (±15° with ET-D3LEW50, ET-D75LE6 / ET-D3LEW60, 0° with ET-D75LE95), When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°. |
| Installation | Horizontal/vertical, free 360-degree installation |
| Terminals | |
| SDI 1 IN |
BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link A), Dual-link 3G-SDI (Link 1), Quad-link HD-SDI (Link 1), Quad-link 3G-SDI (Link 1) |
| SDI 2 IN |
BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link B), Dual-link 3G-SDI (Link 2), Quad-link HD-SDI (Link 2), Quad-link 3G-SDI (Link 2) |
| SDI 3 IN |
BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link A), Dual-link 3G-SDI (Link 1), Quad-link HD-SDI (Link 3), Quad-link 3G-SDI (Link 3) |
| SDI 4 IN |
BNC x 1: 3G/HD/SD-SDI input, Dual-link HD-SDI (Link B), Dual-link 3G-SDI (Link 2), Quad-link HD-SDI (Link 4), Quad-link 3G-SDI (Link 4) |
| MULTI PROJECTOR SYNC IN | BNC x 1 |
| MULTI PROJECTOR SYNC OUT | BNC x 1 |
| SERIAL IN | D-sub 9-pin (female) x 1 for external control (RS-232C compliant) |
| SERIAL OUT | D-sub 9-pin (male) x 1 for link control (RS-232C compliant) |
| REMOTE 1 IN | M3 stereo mini-jack x 1 for wired remote control |
| REMOTE 1 OUT | M3 stereo mini-jack x 1 for link control |
| REMOTE 2 IN | D-sub 9-pin (female) x 1 for external control (parallel) |
| DIGITAL LINK/LAN |
RJ-45 x 1 for network, DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX, compatible with Art-Net, PJLink™ (Class 2), Deep Color, HDCP 2.2 |
| DC OUT | USB Type A x 2 (for power supply DC 5 V total of 2 A) |
| Expansion Slot | SLOT 1 / SLOT 2 (total two terminals, vacant) for interface boards, SLOT NX compatible |
| Power supply |
AC 200 V–240 V, 8.5 A, 50/60 Hz (Light output will decrease to approximately 50 % when using the projector with AC 100 V to AC 120 V [9.8A]) |
| Power consumption | 1,650 W (0.3 W with Standby Mode set to ECO*6, 4 W with Standby Mode set to NORMAL) |
| Cabinet materials | Molded plastic |
| Operation noise*2 | 46 dB |
| Dimensions (W x H x D) |
600 mm x 307 mm*7 x 745 mm ( 23 5/8˝ x 12 3/32˝ x 29 11/32˝ ) ( including protruding parts ); 598 mm x 270 mm*8 x 725 mm ( 23 17/32˝ x 10 5/8˝ x 28 17/32˝ ) ( not including protruding parts ) |
| Weight*9 | 54.0 kg (119 lbs) |
| Operating environment | Operating temperature: 0–45 °C (32–113 °F)*10, operating humidity: 10–80 % (no condensation) |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit, ET-CUK10 Auto Screen Adjustment Kit), Smart Projector Control for iOS/Android™ |
| TerminalsPT-RQ22K |
 |
|
*1 Refresh rate varies depending on scanning frequency. *2 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *3 Average light-output value of all shipped products measured at center of screen in NORMAL Mode. *4 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast [3], under conditions with 35 °C (95 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment. *5 Lens shift is not supported on the ET-D3LEW50. *6 When Standby Mode is set to ECO, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal. *7 With legs at shortest position. *8 Excluding legs. *9 Average value. May differ depending on the actual unit. *10 Operating temperature is 0–40 °C (32–104 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,779 ft) above sea level. When operating in ECO or NORMAL mode at elevations between 0–2,700 m (0–8,858 ft) in ambient temperatures exceeding 40 °C (104 °F), or at elevations between 2,700–4,200 m (8,858–13,780 ft) in ambient temperatures exceeding 25 °C (77 °F), light output may be reduced to protect the projector. |
|
聯絡我們Contact Us
如任何產品相關需求，歡迎您與我們聯絡(服務時間:平日9:00~18:00):
注意事項
請務必填寫有星號(*) 標示之欄位，送出後我們將三分鐘內與您聯繫
※ 客服服務時間 : 週一至週五 9:00~18:00
晟弘科技有限公司-LINE官方帳號
行動條碼
※如何加入好友?
方法(一) 開啟LINE主選單>加入好友>行動條碼 掃描左圖即可加入好友
方法(二) 點擊左方 Add Friends按鈕 即可加入好友
方法(三) 搜尋LINE ID:「@tya3953z」
有任何投影機、投影布幕或其他產品相關需求都歡迎透過LINE詢問。
我們會不定期分享產品相關訊息或優惠活動資訊，歡迎您將晟弘科技加為好友，隨時掌握我們的最新動態! : )