|Projector type||1-Chip DLP™ projector|
|Panel size||17.0 mm (0.67 in) diagonal (16:10 aspect ratio)|
|Display system||DLP™ chip x 1, DLP projection system|
|Number of pixels||2,304,000 (1920 x 1200) x 1|
|Light source||Laser Diode|
|Light output||12,000 lm*1 / 12,600 lm (Center)*2|
|Time until light output declines to 50 %*3||20,000 hours (NORMAL)/24,000 hours (ECO)|
|Resolution||1920 x 1200 pixels|
|Contrast*1||10,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3)|
|Screen size (diagonal)||1.27–15.24 m (50–600 in), 1.27–5.08 m (50–200 in) with ET-DLE055, 2.54–8.89 m (100–350 in) with ET-DLE035, 16:10 aspect ratio|
|Center-to-corner uniformity*1||90 %|
PT-RZ120: Powered zoom (throw ratio 1.7–2.4:1), powered focus F 1.7–1.9, f 25.6–35.7 mm
PT-RZ120L: Optional powered zoom/focus lenses
(from center of screen)
|+50 %, -16 % (+40%, -16% with ET-DLE060) (powered)|
(from center of screen)
|+30 %, -10 % (+19%, -10% with ET-DLE060 / +28 %, -10 % with ET-DLE085/ET-DLE105 ) (powered)|
|Keystone correction range||
Vertical: ±40° (±16° with ET-DLE060, ±22° with ET-DLE105/ET-DLE085/ET-DLE055, +5° with ET-DLE035),
Horizontal: ±15° (±10° with ET-DLE060) (cannot be operated with ET-DLE035)
Keystone correction range with optional
ET-UK20 Upgrade Kit
Vertical: ±45° (±16° with ET-DLE060, ±40° with ET-DLE150/ET-DLE250/supplied lens, ±22° with ET-DLE105/ET-DLE085/ET-DLE055),
Horizontal: ±40° (±10° with ET-DLE060, ±15° with ET-DLE105/ET-DLE085/ET-DLE055)
When [VERTICAL KEYSTONE] and [HORIZONTAL KEYSTONE] are used simultaneously, correction cannot be made exceeding total of 55°.
|Installation||Horizontal/vertical, free 360-degree installation|
|SDI IN||BNC x 1: 3G/HD/SD-SDI input|
|HDMI IN||HDMI 19-pin x 1 (Compatible with HDCP 2.2, Deep Color, 4K signal input)|
|DVI-D IN||DVI-D 24-pin x 1 (DVI 1.0 compliant, compatible with HDCP, compatible with single link only)|
|RGB 1 IN||RGB x 1 (BNC x 5): RGB/YPBPR/YCBCR|
|RGB 2 IN||D-sub HD 15-pin (female) x 1: RGB/YPBPR/YCBCR|
|SERIAL/MULTI-PROJECTOR SYNC IN||D-sub 9-pin (female) x 1 for external control (RS-232C compliant)|
|SERIAL/MULTI-PROJECTOR SYNC OUT||D-sub 9-pin (male) x 1 for link control|
|REMOTE 1 IN||M3 x 1 for wired remote control|
|REMOTE 1 OUT||M3 x 1 for link control (for wired remote control)|
|REMOTE 2 IN||D-sub 9-pin (female) x 1 for external control (parallel)|
|LAN||RJ-45 x 1 for network connection, 10Base-T, 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net)|
|DIGITAL LINK/LAN||RJ-45 x 1 for network and DIGITAL LINK connection (HDBaseT™ compliant), 100Base-TX (Compatible with PJLink™ [Class 2], Art-Net, HDCP 2.2, Deep Color, 4K signal input)|
|Power supply||AC 100–240 V, 50/60 Hz|
|Power consumption||1,100 W|
|Cabinet materials||Molded plastic|
|Operation noise*1||44 dB (Normal)/41 dB (Quiet1)/38 dB (Quiet2)|
|Dimensions (W x H x D)||
PT-RZ120: 498 x 200*5 x 581 mm (19 19/32˝ x 7 7/8˝ *5 x 22 7/8˝ ) (with supplied lens)
PT-RZ120L: 498 x 200*5 x 538 mm (19 19/32˝ x 7 7/8˝ *5 x 21 3/16˝ ) (without lens)
PT-RZ120: Approximately 23.6 kg (51.9 lbs) (with supplied lens)
PT-RZ120L: Approximately 22.8 kg (50.2 lbs) (without lens)
|Operating environment||Operating temperature: 0–45 °C (32–113 °F)*7, operating humidity: 10–80 % (no condensation)|
|Applicable software||Logo Transfer Software, Multi Monitoring & Control Software, Geometry Manager Pro, Smart Projector Control for iOS/Android™|
Note: PT-RZ120L offers the same performance as PT-RZ120, but comes without a lens.
*1 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped.
*2 Average light-output value of all shipped products measured at center of screen in NORMAL Mode.
*3 Around this time, light output will have decreased by approximately 50 %. IEC62087: 2008 Broadcast contents, NORMAL Mode, Dynamic Contrast , under conditions with 30 °C (86 °F), 700 m (2,297 ft) above sea level, and 0.15 mg/m3 of particulate matter. Estimated time until light output declines to 50 % varies depending on environment.
*4 Lens shift is not supported on the ET-DLE055, and the optical axis is fixed with the ET-DLE035.
*5 With legs at shortest position.
*6 Average value. May differ depending on the actual unit.
*7 The light output may be reduced to protect the projector depending on the temperature or altitude of operational environment.
如有投影機、投影布幕以及其他周邊商品相關需求，歡迎您填寫以下表單與我們聯絡( 服務時間: 平日 9:00~18:00 )，亦可來電：
※ 客服服務時間 : 週一至週五 9:00~18:00