Panasonic PT-RZ12K
雷射高階工程投影機
-雙雷射光引擎
-對比度20,000:1
-120Hz畫面更新率
-支援360度安裝
-可另選購各焦段鏡頭
| Power supply | 100–240 V AC, 50/60 Hz |
| Power consumption*1 |
1,200 W (1,280 VA) (0.3 W with Standby Mode set to Eco*2, 4 W with Standby Mode set to Normal); Average power consumption: 800 W (Normal Mode), 680 W (Eco Mode), 620 W (Long Life 1 Mode), 590 W (Long Life 2 Mode), 550 W (Long Life 3 Mode) |
| DLP™ chip | |
| Panel size | 24.4 mm (0.96˝) diagonal (16:10 aspect ratio |
| Display method | DLP™ chip x 3, DLP™ projection system |
| Pixels | 2,304,000 (1920 x 1200) x 3, total of 6,912,000 pixels |
| Refresh rate | 120 Hz*3 |
| Lens | Optional powered zoom and fixed-focus lenses |
| Light source |
Laser diode (Class 1), Light source life*4: 20,000 hours (Normal Mode) / 24,000 hours (Eco Mode) |
| Screen size (diagonal) |
1.78–25.4 m (70–1,000˝), 1.78–15.24 m (70–600˝) with the ET-D75LE8, 3.05-15.24 m (120–600˝) with the ET-D75LE90, 16:10 aspect ratio |
| Brightness*5 | 12,000 lm |
| Contrast*5 | 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) |
| Resolution | 1920 x 1200 pixels*6 |
| Supported RGB signal | XGA–WUXGA |
| Supported video signal | NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i |
|
Optical axis shift*7 (from center of screen) |
|
| Vertical | ±55 % (±44 % with the ET-D75LE6, +73 – +78 % with the ET-D75LE90) (powered) |
| Horizontal | ±20 % (±15 % with the ET-D75LE6, ±6 % with the ET-D75LE90) (powered) |
| Keystone correction range*9 | Vertical: ±40° (±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±15° (0° with ET-D75LE90) |
| Keystone correction range with optional Upgrade Kit ET-UK20*9 | Vertical: ±45° (±40° with ET-D75LE10/ET-D75LE20, ±22° with ET-D75LE50, ±28° with ET-D75LE6, +5° with ET-D75LE90), horizontal: ±40° (±15° with ET-D75LE50/ET-D75LE6, 0° with ET-D75LE90) |
| Installation | Ceiling/floor, front /rear, free 360-degree installation |
| Cabinet materials | Molded plastic |
| Dimensions (W x H x D) |
578 x 270 x 725 mm (22 3/4˝ x 10 5/8˝ x 28 17/32˝) (optional lens, legs and lens cover not included), 578 x 323.5 x 740 mm (22 3/4˝ x 12 23/32˝ x 29 1/8˝) (Including legs at shortest position and protruding parts) |
| Weight*10 | Approx. 44.0 kg (97 lbs) (optional lens not included) |
| Operation noise*5 | 43 dB |
| Operating environment | Operating temperature: 0–50 °C (32–122 °F)*11, operating humidity: 10-–80 % (no condensation) |
| Applicable software | Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10 Auto Screen Adjustment Kit) |
|
TerminalsPT-RZ12K/ PT-RS11K |
 |
|
*1 Operating temperature: 25 °C (77 °F), altitude: 700 m (22 ft 12 in), ICE627087: 2008 Broadcast Content, Image Mode: Dynamic, Dynamic Contrast Mode: 3. *2 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal. *3 Refresh rate varies depending on scanning frequency. *4 At this time the brightness will have decreased to approximately half of its original level. Operating Temperature: 35 °C (95 °F), Altitude 700 m (22 ft 12 in), Dust: 0.15 mg/m3. *5 Measurement, measuring conditions, and method of notation all comply with ISO 21118 international standards. *6 Input signals that exceed the native resolution will be converted to the native resolution. *7 Optical axis shift function cannot be operated when used with the ET-D75LE50. *8 Optical axis shift function cannot be operated when used with the ET-D75LE50/ET-D75LE90. *9 Range varies depending on mounted lens. *10 Average value. May differ depending on the actual unit. *11 When operational mode is set to Normal, operating temperature is from 0 °C (32 °F) to 50 °C (122 °F), and operating temperature is from 0 °C (32 °F) to 45 °C, (113 °F) when used in locations from 1,400 m to 4,200 m (4,593 ft to 13,780 ft) above sea level. When operational mode is set to Eco or Long Life 1/2/3, operating temperature is from 0 °C (32 °F) to 45 °C (113 °F). When used with Smoke Cut Filter, operating temperature is from 0 °C (32 °F) to 40 °C (104 °F). Projector cannot be used in locations over 2,700 m (8,858 ft) with operational mode set to Eco or Long Life 1/2/3. When used with Smoke Cut Filter, the projector cannot be used in locations over 1,400 m (4,593 ft). Light source brightness may decrease depending on operating temperature. When projector is operating at high temperature, brightness will decrease correspondingly. |
|
看更多產品
聯絡我們Contact Us
如任何產品相關需求，歡迎您與我們聯絡(服務時間:平日9:00~18:00):
注意事項
請務必填寫有星號(*) 標示之欄位，送出後我們將三分鐘內與您聯繫
※ 客服服務時間 : 週一至週五 9:00~18:00
晟弘科技有限公司-LINE官方帳號
行動條碼
※如何加入好友?
方法(一) 開啟LINE主選單>加入好友>行動條碼 掃描左圖即可加入好友
方法(二) 點擊左方 Add Friends按鈕 即可加入好友
方法(三) 搜尋LINE ID:「@tya3953z」
有任何投影機、投影布幕或其他產品相關需求都歡迎透過LINE詢問。
我們會不定期分享產品相關訊息或優惠活動資訊，歡迎您將晟弘科技加為好友，隨時掌握我們的最新動態! : )