Panasonic PT-RZ31K
雷射高階工程投影機
-雙雷射光引擎
-對比度20,000:1
-120Hz畫面更新率
-支援360度安裝
-可另選購各焦段鏡頭
Power supply |
AC 200–240 V, 50/60 Hz; AC 100–200 V, 50/60 Hz (Brightness is restricted with lower voltage) |
Power consumption*1 |
2,870 W (0.3 W with Standby Mode set to Eco*2, 4 W with Standby Mode set to Normal) [2,870 VA, AC 200 V]; Average power consumption: 2,310 W (High Mode), 1,890 W (Normal Mode) |
DLP™ chip | |
Panel size |
24.4 mm (0.96˝) diagonal (16:10 aspect ratio) |
Display method | DLP™ chip x 3, DLP™ projection system |
Pixels | 6,912,000 (1920 x 1200 x 3) pixels |
Refresh rate | 120 Hz*3 |
Lens | Optional (no lens included with this model) |
Light source |
Laser diode (Class 1), Light-source life: 18,000 hours (High Mode, brightness decreases to approx. 50 %)*4, 20,000 hours (Normal Mode, brightness decreases to approx. 50 %), 43,800 hours (Long Life 1 Mode, consistent brightness), 61,320 hours (Long Life 2 Mode, consistent brightness), 87,600 hours (Long Life 3 Mode, consistent brightness) [IEC627087: 2008 Broadcast content, Image mode: Standard, Dynamic Contrast Mode: 3] |
Filter |
With supplied filter: 4,000 hours (Normal Mode), 2,000 hours (High Mode), 20,000 hours (Long Life 1/2/3 Mode); With Long Life Filter: 20,000 hours (Normal Mode), 4,000 hours (High Mode), 40,000 hours (Long Life 1/2/3 Mode) |
Screen size (diagonal) |
1.78–25.4 m (70–1,000˝) with 16:10 aspect ratio; 1.78–15.24 m (70–600˝) with the ET-D75LE8, 16:10 aspect ratio; 3.05–15.24 m (120–600˝) with the ET-D75LE95, 16:10 aspect ratio |
Brightness |
31,000 lm (Center)*5*7 /30,000 lm*5*6 (High Mode), 26,000 lm (Center)*5*7 /25,000 lm*5*6 (Normal Mode), 12,000 lm (Long Life 1 Mode), 10,000 lm (Long Life 2 Mode), 8,000 lm (Long Life 3 Mode) |
Contrast*6 | 20,000:1 (Full On/Full Off, Dynamic Contrast Mode: 3) |
Resolution | 1920 x 1200 pixels |
Supported RGB signal | XGA–WUXGA |
Supported video signal | NTSC/PAL/SECAM, 480p/i, 720p, 1080p/i |
Optical axis shift*8 (from center of screen) |
|
Vertical | ±55% (±44% with the ET-D75LE6, +68 – +78% with the ET-D75LE95) (powered) |
Horizontal | ±20% (±15% with the ET-D75LE6, ±12% with the ET-D75LE95) (powered) |
Keystone correction range*9 | Vertical: ±40 ° (± 22 ° with ET-D75LE50, ±28 ° with ET-D75LE6), Horizontal: ±15 ° |
Keystone correction range with optional Upgrade Kit ET-UK20*9 | Vertical: ±45 ° (± 40 ° with ET-D75LE10/20, ±22 ° with ET-D75LE50, ±28 ° with ET-D75LE6), Horizontal: ±40 ° (±15 ° with ET-D75LE50/6), Up to a total of ±55 ° during simultaneous horizontal and vertical correction. |
Installation | Ceiling/floor, front /rear, free 360-degree installation |
Cabinet materials | Metal, molded plastic |
Dimensions (W x H x D) |
700 x 418*10 x 1,250 mm (27 25/32˝ x 16 15/32˝*10 x 49 7/32˝ ) (including protruding parts); 700 x 373*11 x 1,070 mm (27 9/16˝ x 14 11/16˝*11 x 42 1/8˝ ) (not including protruding parts) |
Shipping dimensions (W x H x D) |
PT-RZ31K/KUY: 914 x 625 x 1,488 mm (35 31/32˝ x 24 19/32˝ x 58 19/32˝); PT-RZ31KE: 914 x 625 x 1,488 mm (35 31/32˝ x 24 19/32˝ x 58 19/32˝) |
Weight*12 | Approx. 79 kg (174 lbs.) |
Shipping weight |
PT-RZ31K/KUY: 100.7 kg (222.0 lbs.); PT-RZ31KE: 97.5 kg (214.9 lbs.) |
Operation noise*5 | 49 dB |
Operating environment |
Operating temperature: 0–50 °C (32–122 °F)*13 [altitude: up to 1,400 m (4,593 ft), High/Normal Mode]; 0–45 °C (32–113 °F)*13 [altitude: up to 4,200 m (13,780 ft), High/Normal/Standby/Eco/Long Life1/2/3 Mode]; 0–40 °C (32–104 °F) [altitude: up to 1,400 m (4,593 ft) with Smoke Cut Filter]; Operating humidity: 10–80 % (no condensation) |
Applicable software |
Logo Transfer Software, Multi Monitoring & Control Software, Early Warning Software, Geometry Manager Pro (ET-UK20 Upgrade Kit and ET-CUK10 Auto Screen Adjustment Kit) |
TerminalsPT-RZ31K/ RS30K |
|
*1 Operating temperature: 25 °C (77 °F), altitude: 700 m (2,297 ft), IEC627087: 2008 Broadcast Content, Image Mode: Standard, Dynamic Contrast Mode: 2. *2 When Standby Mode is set to Eco, network functions such as power on over LAN will not operate. Additionally, only certain commands can be received for external control using the serial terminal. *3 Refresh-rate varies depending on vertical scanning frequency. *4 Brightness will have decreased to approximately 70 % of its original level after 8,000 hours operation. *5 With lens other than ET-D75LE95 and power supply of AC 200 V. *6 Measurement, measuring conditions, and method of notation all comply with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *7 Measured at center area of projector screen. Measurement method is in compliance with ISO/IEC 21118: 2012 international standards. Value is average of all products when shipped. *8 Optical axis shift function cannot be operated when used with the ET-D75LE50. *9 Range varies depending on mounted lens. *10 With legs at shortest position. *11 Excluding legs. *12 Average value. May differ depending on the actual unit. *13 If ambient temperature exceeds 35 °C (95 °F) when used in locations from 0 m to 2,700 m (0 ft to 8,858 ft) above sea level, or if it exceeds 25 °C (77 °F) when used in locations from 2,700 m to 4,200 m (8,858 ft to 13,780 ft) above sea level, light output may be reduced to protect the projector. |
聯絡我們Contact Us
如任何產品相關需求,歡迎您與我們聯絡(服務時間:平日9:00~18:00):
注意事項
請務必填寫有星號(*) 標示之欄位,送出後我們將三分鐘內與您聯繫
※ 客服服務時間 : 週一至週五 9:00~18:00
晟弘科技有限公司-LINE官方帳號
行動條碼
※如何加入好友?
方法(一) 開啟LINE主選單>加入好友>行動條碼 掃描左圖即可加入好友
方法(二) 點擊左方 Add Friends按鈕 即可加入好友
方法(三) 搜尋LINE ID:「@tya3953z」
有任何投影機、投影布幕或其他產品相關需求都歡迎透過LINE詢問。
我們會不定期分享產品相關訊息或優惠活動資訊,歡迎您將晟弘科技加為好友,隨時掌握我們的最新動態! : )